InfoLinker

A lightweight and user friendly device

Wearble Software

Packaged software optimized for the wearable device

Wearble Software

SPECIFICATIONS

Model No. WUZ-01B / WUZ-01A
Buttons 4 RAM
(main memory)
1GB USB port Micro-B
Touch sensor 1 ROM
(user memory)
8GB Battery type Li-ion polymer
Approximate weight 50g Sensor 3-axis accelerometer, 3-axis gyro, 3-axis magnetic Battery life Approximately 1 hour
*actual life will vary depending on the application
Resolution WQVGA(428×240) Camera resolution 1992x1216 effective pixels Battery capacity 300mAh
Aspect ratio 16:9 Microphone 16bit Monaural microphone External power Available with compatible power supplies
( Sold separately )
Field of view (approximate) 14 degrees Voice input / output 4-pole mini jack Charger Possible to charge 5 units simultaneously
CPU TI OMAP 4470 dual-core MAX1.5GHz Bluetooth® Bluetooth 3.0
(A2DP / AVRCP / ANP / PASP / TIP / SPP / ICP / HFP / HID)
Can be fitted to either of the right eye or the left eye
OS Android 4.2.2 Wireless LAN Model No. WUZ-01B : IEEE 802.11 a/b/g/n
Model No. WUZ-01A : IEEE 802.11 b/g/n
Battery replacement is possible without reboot
( hot swap )

Documents

    

“WUQR” InfoLinker Terminal Setting Application

Refer to the section regarding WUQR in the instruction manual for the use of WUQR.
When downloading “WUQR InfoLinker Terminal Setting Application,” read through the following “User License Agreement” and select “I agree.”
When InfoLinder is used with the PC (Windows/Mac), the User License Agreement is included in the development environment file. Download from there.
Android2015.12.07

User License Agreement of “WUQR” Application

Article 1 User License
1. This user license agreement (hereinafter called “this agreement”) defines the use conditions regarding the software, “WUQR,” (hereinafter called “this software”) provided by Westunitis Co., Ltd. (hereinafter called “our company”). The use conditions regarding this software are applied to this agreement with the customer who downloaded “WUQR” (hereinafter called “the customer”).
2. This software is provided and the use right of this software is granted only subject to the provisions of this agreement.

Article 2 Modification of Agreement
1. This agreement is subject to modification without prior consent of the customer or without prior notice. The modified contents of the agreement take effect at the point that the customer recognizes the modification or when the modification becomes recognizable by the customer.
2. The customer is required to check the latest version of this agreement. If the customer or any third party incurs disadvantages, damages, or troubles due to negligence of checking the latest version of this agreement, our company does not take any responsibility whatsoever.

Article 3 Establishment, Enforcement, and Termination of the Agreement
1. This agreement takes effect when the customer downloads this software or when the customer starts using this software.
2. If the customer decides not to use this software, the customer can terminate this agreement upon deletion and destroying all of this software that are owned or controlled by the customer.
3. Our company has the right to terminate this agreement without prior notice to or prior consent from the customer. In that case, the customer is required to delete and destroy all of this software owned or controlled by the customer according to the regulation in the preceding article once the customer recognizes the termination of this agreement or when the termination becomes recognizable by the customer.
4. If the customer violates any of articles in this agreement, this agreement is immediately terminated, and the customer is required to delete and destroy all of this software owned or controlled by the customer (including the copies of the software created against this agreement).
5. The customer does not have a right to claim for compensation of damages, indemnity, or any other payment regarding termination of this agreement for any reason.

Article 4 Prohibitions
1. It is prohibited to copy, modify, or execute reverse engineering such as reverse compile and reverse assembly (mainly, specifies the operation “to analyze the contents and convert to the form that is understandable by a person”) on all or part of this software.
2. It is prohibited to grant a permission to use, purchase, lend, transfer, disclose, or lease this software to any third party.
3. It is prohibited to install or use only a part of this software.
4. It is prohibited to delete or modify the indications of copyright or other rights of our company attached on this software.
5. It is prohibited to use the technical or all of other information of our company acquired regarding this software for any purpose other than intended purpose of this agreement, or it is prohibited to disclose or leak such information to any third party.

Article 5 Indemnification
1. Our company does not warrant any performance of this software, compatibility to the purpose of use or equipment to be used, and accuracy and reliability regarding the result of use. Moreover, our company does not have any kind of defect liability.
2. Any trouble occurs regarding this software is handled with the full responsibility and with the burden of total expense on the customer.
3. Our company does not incur any obligation of providing technical services such as technical supports, maintenance, and functional improvement of this software.
4. Our company is permitted to modify and correct the specifications and contents of this software and change the distribution method of this software without prior notice or consent.
5. Our company does not warrant that this software is not violating copyrights or any other rights of a third party. Moreover, our company does not take responsibility or be liable for any compensation of direct or indirect damages that the customer or other third party is incurred regarding this software. In addition, the customer does not have any right to claim for any responsibility to our company.
6. All items under this article are applied to the entire information that is directly and/or indirectly related to this software and that is provided from our company to the customer in addition to this software itself.

Article 6 Ownership of the Copyright
1. This agreement is governed by and interpreted in accordance with the laws of Japan.
2. When using this software, the customer is required to observe “Foreign Exchange and Foreign Trade Act” and other laws related to exports and imports (including all laws and regulations based on the laws of Japan and foreign countries). Moreover, the customer is required to acquire all acceptance, permission, and authorization (also, including all laws and regulations based on the laws of Japan and other laws) required regarding such laws under the full responsibility of the customer.
3. Regulations in Items 4 and 5 of Article 3, Article 4, Article 5, and Items 1 and 2 of Article 6 continue to be valid even after termination of this agreement.

Download the “WUQR” Application.

Development Environment

When downloading the User License Agreement of “adbinput” application, read through the following “User License Agreement” and select “I agree.”
PC (Windows / Mac)2016.06.06

User License Agreement of Application

Article 1 User License
1. This user license agreement (hereinafter called “this agreement”) defines the use conditions of the software “adbinput” and “WUQR” (hereinafter called “this software”) included in the InfoLinker development environment provided by Westunitis Co., Ltd. (hereinafter called, “our company”). The use conditions of this software are applied to this agreement with the customer who downloaded the InfoLinker development environment (hereinafter called “the customer”).
2. This software is provided and the use right of this software is granted only subject to the provisions of this agreement.

Article 2 Modification of Agreement
1. This agreement is subject to modification without prior consent of the customer or without prior notice. The modified contents of the agreement take effect at the point that the customer recognizes the modification or when the modification becomes recognizable by the customer.
2. The customer is required to check the latest version of this agreement. If the customer or any third party incurs disadvantages, damages, or troubles due to negligence of checking the latest version of this agreement, our company does not take any responsibility whatsoever.

Article 3 Establishment, Enforcement, and Termination of the Agreement
1. This agreement takes effect when the customer downloads this software or when the customer starts using this software.
2. If the customer decides not to use this software, the customer can terminate this agreement upon deletion and destroying all of this software that are owned or controlled by the customer.
3. Our company has the right to terminate this agreement without prior notice to or prior consent from the customer. In that case, the customer is required to delete and destroy all of this software owned or controlled by the customer according to the regulation in the preceding article once the customer recognizes the termination of this agreement or when the termination becomes recognizable by the customer.
4. If the customer violates any of articles in this agreement, this agreement is immediately terminated, and the customer is required to delete and destroy all of this software owned or controlled by the customer (including the copies of the software created against this agreement).
5. The customer does not have a right to claim for compensation of damages, indemnity, or any other payment regarding termination of this agreement for any reason.

Article 4 Prohibitions
1. It is prohibited to copy, modify, or execute reverse engineering such as reverse compile and reverse assembly (mainly, specifies the operation “to analyze the contents and convert to the form that is understandable by a person”) on all or part of this software.
2. It is prohibited to grant a permission to use, purchase, lend, transfer, disclose, or lease this software to any third party.
3. It is prohibited to install or use only a part of this software.
4. It is prohibited to delete or modify the indications of copyright or other rights of our company attached on this software.
5. It is prohibited to use the technical or all of other information of our company acquired regarding this software for any purpose other than intended purpose of this agreement, or it is prohibited to disclose or leak such information to any third party.

Article 5 Indemnification
1. Our company does not warrant any performance of this software, compatibility to the purpose of use or equipment to be used, and accuracy and reliability regarding the result of use. Moreover, our company does not have any kind of defect liability.
2. Any trouble occurs regarding this software is handled with the full responsibility and with the burden of total expense on the customer.
3. Our company does not incur any obligation of providing technical services such as technical supports, maintenance, and functional improvement of this software.
4. Our company is permitted to modify and correct the specifications and contents of this software and change the distribution method of this software without prior notice or consent.
5. Our company does not warrant that this software is not violating copyrights or any other rights of a third party. Moreover, our company does not take responsibility or be liable for any compensation of direct or indirect damages that the customer or other third party is incurred regarding this software. In addition, the customer does not have any right to claim for any responsibility to our company.
6. All items under this article are applied to the entire information that is directly and/or indirectly related to this software and that is provided from our company to the customer in addition to this software itself.

Article 6 Ownership of the Copyright
1. This agreement is governed by and interpreted in accordance with the laws of Japan.
2. When using this software, the customer is required to observe “Foreign Exchange and Foreign Trade Act” and other laws related to exports and imports (including all laws and regulations based on the laws of Japan and foreign countries). Moreover, the customer is required to acquire all acceptance, permission, and authorization (also, including all laws and regulations based on the laws of Japan and other laws) required regarding such laws under the full responsibility of the customer.
3. Regulations in Items 4 and 5 of Article 3, Article 4, Article 5, and Items 1 and 2 of Article 6 continue to be valid even after termination of this agreement.

Download the “Development Environment” Application.

picoLinker

More than just a compact

“picoLinker” is a one-eye head mounted display and is used to connect to small PCs, smartphones, and wearable cameras via HDMI input.

■Medical Support System
The system can be used as a best support system as it needs to process mass data in real-time at a medical site.
・Transmission of a vital data to doctors in real-time.
・Video recording by using doctor’s eyes and auxiliary cameras.
・Display of auxiliary information of CT, MRI, and X-ray.

“picoLinker” is mainly for use in the medical field but can also be used in the industrial field.
Our new Head Mounted Display can of course be used by everyday people!
You do not need dedicated glasses.
It is possible to attach the device to any pair of glasses you may have on hand.
Our device with its smart design and intuitive operation is easy to mount and use anybody.

SPECIFICATIONS

Model No. WUZ-02A
Basic machine weight (approximate) 30g Resolution nHD(600×480) Aspect ratio 16:9
Input HDMI Field of view (approximate) 14 degrees Can be fitted to either of the right eye or the left eye
Output Speaker
* This product is a version under development.
* Product specifications may change without notice.
Company Profile

We started up as the planning and production studio for a manual in 1983. At that time, it was "the analog age" that we mainly work with using pencils, glues, cutters or others by hand. "DTP or "CAD" had taken the place of them, and it have changed to "the digital age" that we use the computers for many operations. Even the age is changing, our policy "Keep creating the product which is complementary with the age and client's needs" have never changed. We work for not only computerization of manuals or technical documents but also positively work on manufacture fitting with each age such as planning and development of electron delivery by internet, product development with the latest technology or others, and we always hope to send "something everyone can understand" with the usability which do not choose the user to drive forward contents production, system development and soft wear development fitting the information and telecommunications age. All the staff always try to supply the truly helpful products by the communication with the clients through the products with "Sensation and delight of Production". WESTUNITIS, our policy is "Keep creating the product which is complementary with the age and client's needs".

President : Takahito Fukuda

Contact

We will use the customers' personal information only for reply to the inquiry.
Regarding inquiries regarding InfoLinker prices and purchase, please be aware that we may share personal information entered by customers with reseller Ryoden Corporation and respond from resellers in some cases.
Please be reminded that a reply may be taken time because of the weekend, outside of our business hours or content of the inquiry.
Please make sure that your e-mail address is correct.

WESTUNITIS CO., LTD.

29F Grand Front Osaka Tower-A,4-20,Ofukacho,Kita-ku,Osaka,Japan,530-0011

Capital: 49550000JPY

Tel: +81-6-6375-2831

Fax: +81-6-6375-2832

WESTUNITIS Inc.

3350Scott Blvd. Suite 29 Santa Clara CA 95054